Ratchet & Snap Binders

Ratchet & Snap Binders, Assemblies, Straps & Accessories

Ratchet assembly with flat hook.

Replace with a page introduction.

This system also has a 10″-12″ rise bow so this combination allows the operator to have the safety and security of a sidekit, with the versatility of easily being able to load or unload on either side of the trailer.

Scroll below to view our product selection!

USA made ratchet binder..

USA Made
Ratchet Binder

Easy to operate Ratchet Binder locks securely when binding or releasing, without the use of extra tools.

  • WLL (Working Load Limit): 7,100 lbs
  • Fits: 5/16″ and 3/8″ Chain
  • Length Adjustment: 23″ to 30″ Hook to Hook
  • Weight: 12.2 lbs
Heavy duty ratchet binder.r

Heavy Duty
Ratchet Binder

Easy to operate Heavy Duty Ratchet Binder locks securely when binding or releasing, without the use of extra tools for your extra strength needs.

  • WLL (Working Load Limit): 8,800 lbs
  • Fits: 5/16″ and 3/8″ Chain
  • Weight: 11.4 lbs
Safe-T-Binder ratchet binder

Safe-T-Binder
Ratchet Binder

The grab-hold “T” handle allows drivers to achieve proper tension when tightening the chain by hand. Great to use with sidekits.

  • WLL (Working Load Limit): 5,400 lbs
  • Fits: 5/16″ and 3/8″ Chain
  • Weight: 10.6 lbs
DuraFold Folding ratchet binder

DuraFold Folding
Ratchet Binder

  • 3-position pawl selector allows for fast adjustment
  • Enclosed ratchet gear housing protection
  • Push button lock allows for ratcheting & folded position of handle
  • Folding handle for easier storage
Snap binder

USA Made
Ratchet Binder

Easy to operate Ratchet Binder locks securely when binding or releasing, without the use of extra tools.

  • WLL (Working Load Limit): 7,100 lbs
  • Fits: 5/16″ and 3/8″ Chain
  • Length Adjustment: 23″ to 30″ Hook to Hook
  • Weight: 12.2 lbs
Adjustable Snap Binder with Safety Pin

Adjustable Snap Binder
with Safety Pin

Adjustable Snap Binder has a built-in adjustment feature that provides a quick, easy, and safe solution to attaining proper tension. Simply rotate the adjustable end and extend or retract it to achieve desired length.

  • WLL (Working Load Limit): 5,400 lbs
  • Fits: 5/16″ and 3/8″ Chain
  • Weight: 10.41 lbs

Tri-County offers offers a full line of 2″, 3″, and 4″ straps made by Kinedyne. All winch straps are made from resin coated polyester for a minimum stretch and maximum wear resistance. These rugged straps provide the strength and durability demanded in flatbed tie-down requirements. All winch straps are labeled to meet CVSA guidelines, regulations, and WSTDA recommended standards.


1"x16' Mini-Ratchet

1″x16′
Mini-Ratchet

Anti-kickback handle allows for quick and easy use. Our Mini Ratchet Assembly includes #800 Ratchet, Wire Hooks and D-Rings.

  • WLL (Working Load Limit): 835 lbs
  • Length: 16′
  • Weight: 1.5 lbs
Ratchet assembly with flat hook.

Ratchet Assembly
with Flat Hook

2″, 3″, or 4″ ratchet strap with flat hook and wide handle.

  • WLL (Working Load Limit): 2″-3,335 lbs | 3″-5,400 lbs | 4″-5,400 lbs
  • End Hardware: 1015 Flat Hook
  • Length: 30′
  • Weight: 2″-6 lbs | 3″-12.6 lbs | 4″-15.2 lbs
Ratchet Assembly with Chain Extension

Ratchet Assembly
with Chain Extension

2″, 3″, or 4″ ratchet assembly with chain extension and ratchet

  • WLL (Working Load Limit): 2″-3,335 lbs | 3″-5,400 lbs | 4″-5,400 lbs
  • End Hardware: 3705-2 Chain Anchor
  • Length: 30′
  • Weight: 2″-11 lbs | 3″-16.1 lbs | 4″-19.6 lbs
Ratchet Assembly with Wire Hook

Ratchet Assembly
with Wire Hook

2″ or 4″ ratchet strap with wire hook and wide handle

  • WLL (Working Load Limit): 2″-3,335 lbs | 4″-6,6700 lbs
  • End Hardware: 2″-1007 Hook | 4″-1016 Hook
  • Length: 30′
  • Weight: 2″-5.8 lbs | 4″-14.6 lbs

Ratchet Bucket Handle Extension

Ratchet Bucket
Handle Extension

  • Weight: 1.8 lbs

“Rhino Webbing” is a more durable, cut and abrasion resistant webbing for cargo control tie-down straps. “Rhino Webbing” yields 30% more tensile strength after severe abrasion and is 30% thicker with a tougher surface.


2" Rhino Ratchet Assembly with Wire Hook

2″ Rhino Ratchet Assembly
with Wire Hook

  • WLL (Working Load Limit): 4,000 lbs
2" Rhino Ratchet Assembly with Flat Hook

2″ Rhino Ratchet Assembly
with Flat Hook

  • WLL (Working Load Limit): 4,000 lbs
2" Rhino Ratchet Assembly with Chain Extension

2″ Rhino Ratchet Assembly
with Chain Extension

  • WLL (Working Load Limit): 4,000 lbs

“Rhino Webbing” is a more Durable, Cut and Abrasion Resistant webbing for cargo control tie-down straps. “Rhino Webbing” yields 30% more Tensile Strength after Severe Abrasion and is 30% Thicker with a Tougher surface.


3″ Rhino Web
with Roll-Off Hook

  • WLL (Working Load Limit): 5,000 lbs
  • Length: 5′
4" Rhino Web with Flat Hook

4″ Rhino Web
with Flat Hook

  • WLL (Working Load Limit): 6,670 lbs
  • Length: 30′

Tri-County Tarp offers a large variety of winch straps. These rugged straps are manufactured by Kinedyne from resin-coated polyester for minimum stretch and maximum wear resistance in 2″, 3″, and 4″ widths. Straps can be purchased with a flat hook, chain extension, or delta ring end hardware.


2", 3" or 4" Web with Flat Hook

2″, 3″ or 4″ Web
with Flat Hook

  • WLL (Working Load Limit): 2″- 3,335 lbs | 3″- 5,400 lbs | 4″- 5,400 lbs
2", 3" or 4" Web with Chain Extension

2″, 3″ or 4″ Web
with Chain Extension

  • WLL (Working Load Limit): 4,000 lbs
4" Web with Delta Ring

4″ Web
with Delta Ring

  • WLL (Working Load Limit): 4″-5,400 lbs

(Also Available in Rhino)
(Special Order)

We carry reliable removable or bolt-on strap winders. Made of all steel construction with zinc plating. It easily clamps to side rails and can quickly wind up 2″, 3″, and 4″ straps.


Removable Strap Winder

Removable
Strap Winder

Our Removable Strap Winder can conveniently disassemble for storage.

Bolt-On Strap Winder

Bolt-On
Strap Winder

Our Bolt-On Strap Winder can be easily bolted to create a secure winding system.

Kwik Winder

Kwik
Winder

Winds winch straps in the winch in a fraction of the time it takes to wind them by hand.